Publicidad
Idiomas disponibles
Idiomas disponibles
GB
F
D
E
RULES FOR SAFE OPERATION
Remove adjusting keys and wrenches. Form the habit
■
of checking to see that keys and adjusting wrenches
are removed from the tool before turning it on.
Avoid unintentional starting. Do not carry the tool with
■
a finger on the switch.
Stay alert. Watch what you are doing. Use common
■
sense. Do not operate tool when you are tired.
Have your tool repaired by a qualified person.
■
This tool is in accordance with the relevant safety
requirements. Repairs should only be carried out by
qualified persons using original spare parts, otherwise
this may result in considerable danger to the user.
WARNING
Use only the manufacturer's replacement parts.
Failure to do so may cause poor performance,
possible injury and may void your warranty
PRECAUTIONS AGAINST KICKBACK
Kickback is a dangerous reaction that can lead to
serious injury.
Keep a good firm grip on the unit with both hands
■
when operating the unit. Place your right hand on the
rear handle and the left hand on the front handle.
A firm grip will help you reduce kickback and maintain
control of the unit.
Make sure that the area in which you are cutting is
■
free from obstructions. Do not let the blade come in
contact with any obstruction while operating the unit.
Always cut with the unit at full speed. Fully squeeze
■
the trigger and maintain a steady cutting speed.
Use only the replacement blade specified for your unit.
■
BATTERY TOOL USE AND CARE
Ensure the switch is in the off position before
■
inserting battery pack. Inserting the battery pack into
power tools that have the switch on invites accidents.
Recharge only with the charger specified by the
■
manufacturer. A charger that is suitable for one type
of battery pack may create a risk of fire when used
with another battery pack.
Use power tools only with specifically designated
■
battery packs. Use of any other battery packs may
create a risk of injury and fire.
I
P
NL
S
DK
N
FIN GR HU
CZ RU
English
When battery pack is not in use, keep it away from
■
other metal objects like paper clips, coins, keys, nails,
screws, or other small metal objects that can make a
connection from one terminal to another. Shorting the
battery terminals together may cause burns or a fire.
Under abusive conditions, liquid may be ejected from
■
the battery; avoid contact. If contact accidentally
occurs, flush with water. If liquid cotntacts eyes,
additionally seek medical help. Liquid ejected from
the battery may cause irritation or burns.
SAVE THESE INSTRUCTIONS. REFER TO THEM
FREQUENTLY AND USE THEM TO INSTRUCT
OTHERS WHO MAY USE THIS UNIT. IF YOU LOAN
SOMEONE THIS UNIT, LOAN THEM THESE
INSTRUCTIONS ALSO.
PRODUCT SPECIFICATIONS
Motor
No Load Speed
Battery Pack
Charging Rate
Cutting Capacity
Weight With Battery Pack
Battery pack*
Charger*
*BATTERIES AND CHARGERS SOLD SEPARATELY
FEATURE
Fig. 2
A. 60º MAXIMUM
Fig. 3
A. TRIGGER LOCK BUTTON
B. REAR HANDLE
C. TRIGGER
D. BATTERY PACK (NOT INCLUDED)
E. ANCHOR SCREW
F. BLADE WRENCH AND STORAGE AREA
G. FRONT HANDLE
H. SHAFT ADJUSTMENT COLLAR
I.
MOTOR HOUSING
J. CUTTING GUIDE
K. BLADE
8
RO PL SLO HR TR EST LT
18 V DC
3000 min
18 V
1 to 1-1/2 hour
102 mm
3.65 kg
BPP-1817M/BPP-1815M
BC-1800/BC-1815S
LV
SK BG
-1
Publicidad
