Publicidad
Idiomas disponibles
Idiomas disponibles
GB
F
D
E
FEATURE
Fig. 5
A. MOUNTING CLAMP PIN
B. POSITIONING PIN HOLE
C. MOUNTING CLAMP
Fig. 6
A. BATTERY PACK (NOT INCLUDED)
B. LATCHES
Fig. 7
A. SHAFT ADJUSTMENT COLLAR
B. LOWER PORTION OF SHAFT ADJUSTMENT
COLLAR
C. TO UNLOCK COLLAR
Fig. 8
A. SLIDE OUT TO DESIRED POSITION
Fig. 9
A. SHAFT ADJUSTMENT COLLAR
B. LOWER PORTION OF SHAFT ADJUSTMENT
COLLAR
C. TO LOCK COLLAR
Fig. 10
A. TRIGGER LOCK BUTTON
B. TRIGGER
Fig. 11
A. SECOND CUT
B. LOAD
C. FIRST CUT 1/4 DIAMETER
D. FINAL CUT
Fig. 12
A. CUTTING GUIDE
ASSEMBLY
KNOW YOUR POLE PRUNER
See Figure 3.
Before attempting to use the pole pruner, familiarize
yourself with all operating features and safety
requirements.
WARNING
If any parts are missing, do not operate your pole
pruner until the missing parts are replaced.
Failure to do so could result in possible serious
personal injury.
I
P
NL
S
DK
N
FIN GR HU
CZ RU
English
TO INSTALL AND REMOVE BLADE
INSTALLING THE BLADE
See Figures 4 and 5.
Remove the battery pack from the pole pruner.
■
Remove the blade wrench from the storage area.
■
See Figure 4.
Place the blade wrench in access hole and loosen the
■
blade retaining screw. See Figure 5.
Install blade into the mounting clamp.
■
NOTE: Make sure the mounting clamp pin is positioned
correctly in the positioning pin hole of the blade.
If not positioned correctly the mounting clamp will not
hold the blade securely.
Tighten the blade retaining screw securely with blade
■
wrench.
Return blade wrench to storage area.
■
REMOVING THE BLADE
See Figures 4 and 5.
Remove the battery pack from the pole pruner.
■
Remove the blade wrench from the storage area.
■
See Figure 4.
Place the blade wrench in access hole and remove
■
the blade retaining screw. See Figure 5.
Remove the blade from the unit, making sure the
■
blade clears the mounting clamp pin. See Figure 5.
TO INSTALL BATTERY PACK (NOT INCLUDED)
See Figure 6.
Place the battery pack in your pole pruner.
■
Align raised rib on battery pack with groove in pole
pruner's battery port.
Make sure the latches on each side of the battery
■
pack snap in place and that battery pack is secured in
pole pruner before beginning operation.
TO REMOVE BATTERY PACK (NOT INCLUDED)
See Figure 6.
Locate latches of battery pack and depress to release the
battery pack from the pole pruner.
9
RO PL SLO HR TR EST LT
WARNING
Failure to remove the battery pack from the pole
pruner could result in accidental starting which
could possibly cause serious personal injury.
LV
SK BG
Publicidad
