Descargar Imprimir esta página

Ryobi ONE+ OPS-1801 Manual De Utilización página 17

Podadera inalámbrica

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 24
GB
F
D
E
OPERATION
Cutting lower branches first will allow the top branches
more room to fall.
Work slowly, keeping both hands on the pole pruner
with a firm grip. Maintain secure footing and balance.
Keep the tree between you and the blade while
limbing. Cut from the side of the tree opposite the
branch you are cutting.
Do not cut from a ladder, this is extremely dangerous.
Leave this operation for professionals.
Do not use for felling or bucking.
When pruning trees it is important not to make the
flush cut next to the main limb or trunk until you have
cut off the limb further out to reduce the weight.
This prevents stripping the bark from the main
member. Underbuck the branch 1/4 way through for
your first cut, your second cut should overbuck to
drop the branch off. Now make your final cut
smoothly and neatly against the main member so the
bark will grow back to seal the wound. See Figure 11.
WARNING
Never climb into a tree to limb or prune.
Do not stand on ladders, platforms, a log or in any
position which can cause you to lose your balance
or control of the unit.
MAINTENANCE
WARNING
When servicing use only identical replacement
parts. Use of any other parts may create a hazard
or cause product damage.
Avoid using solvents when cleaning plastic parts.
Most plastics are susceptible to damage from
various types of commercial solvents and may
be damaged by their use. Use clean cloths to
remove dirt, dust, oil, grease, etc.
WARNING
Do not at any time let brake fluids, gasoline,
petroleum-based products, penetrating oils, etc.
come in contact with plastic parts. They contain
chemicals that can damage, weaken or
destroy plastic.
I
P
NL
S
DK
N
FIN GR HU
CZ RU
English
TRANSPORTING AND STORING
Always place the blade cover on the blade before
storing or transporting the pole pruner. Use caution to
avoid the sharp teeth of the blade.
Clean the pole pruner thoroughly before storing.
Store the pole pruner in a dry, well-ventilated place
that is inaccessible to children. Keep away from
corrosive agents such as garden chemicals and
de-icing salts.
DISPOSAL
Waste electrical products should not be disposed of
together with household waste. Please recycle where
facilities exist. Check with your local authority or retailer
for recycling advice.
11
RO PL SLO HR TR EST LT
WARNING
Do not attempt to modify this tool or create
accessories not recommended for use with this
tool. Any such alteration or modification is misuse
and could result in a hazardous condition leading
to possible serious personal injury.
LV
SK BG

Publicidad

loading