Publicidad
Idiomas disponibles
Idiomas disponibles
About: the current host computer software and device firmware version information.
Upgrade: call the upgrade applet to upgrade the firmware of the device.
Scan button:
Click the "Scan" button and directly scan all devices in the current connection mode and display the
scanning progress.
Set button:
Select the corresponding device connection port and click the "Settings" button, and the port connection
interface as shown will pop up. Select the corresponding port and confirm after setting the parameters. If
the device port changes, click the "Refresh" button in the lower left corner for instant Update port
information.
Link button:
To set the parameters of multiple devices at the same time, click the "Link" button, and the following figure
Device networking link interface will pop up. Select the device of the same model in the left frame, move
to the group in the middle frame, and then select the synchronization settings required After pressing the
"OK" button, the grouping is successful. You can also use the same operation to modify the network
grouping settings.
12
Publicidad
