Publicidad
Idiomas disponibles
Idiomas disponibles
As shown in the figure above, click the noise gate switch
in the upper right corner on and
the red is off. The attack time, release time, and threshold level are the parameters corresponding to the
noise gate function. You may drag the slider
or block values corresponding to the
input numerical values .
When the noise gate function is turned on, the points in the graph on the left
can be dragged
diagonally to adjust Page 18 / 34 the value of the start control level.
Input Parametric Equalizer:
Double-click in the function button
to pop up the parameter equalizer page. The button in the
upper right corner
of the module can enlarge this interface for easier debugging.
Function buttons:
The functions of the top buttons are:
Phase curve: display the phase curve of the current channel.
View: show or hide all balance control points.
Bypass: turn on or off all equalizer EQ of the current channel at the same time.
17
Publicidad
