Publicidad
Idiomas disponibles
Idiomas disponibles
Recall: Recall the selected preset to the current parameters of the device.
Delete: delete the selected preset parameter.
Clear: Clear all preset parameter records that are not preset by the system.
Set as boot file: Set the selected gear as the boot file, and each time the power is turned on, the boot file
will be automatically called and all the parameters of the preset will be automatically used to work.
Import and preset: Import a single device parameter file in the computer system, and directly overwrite
the existing parameter data.
Export and preset: save the current equipment parameters to the computer system to produce a single
equipment parameter preset file.
Import preset package: import multiple preset parameter packages in the computer system.
Export preset package: Export the parameters of all gears in the equipment preset to the computer system
to produce multiple preset parameter package files.
Firmware upgrade:
Click "System"- " Upgrade" in the menu bar of the main software interface, and the firmware upgrade
interface will pop up.
When the lower computer system of the device has been updated, after obtaining the upgrade file, you
can open the firmware upgrade interface as shown in the figure above. After selecting the corresponding
upgrade file in the "Upgrade File" column, click "UPGRADE" in the upper right corner, and the system will
automatically start upgrade operation as well as transfer upgrade file to the lower device, and the
operation log is displayed in the progress box below. After the upgrade is completed, the machine will
restart automatically or manually restart the machine to complete the upgrade.
Dimmensions:
32
Publicidad
