Mark MDX 0408 Manual Del Usuario página 32

As shown in the figure above, channel copy is to first select the source channel parameters of a source
device and copy them to the target channel of the same device or other target devices. Input channels
and output channels cannot copy each other. The left side is the corresponding channel, and the right
side is the parameter to be copied. The "input" and "output" buttons at the top of the interface can switch
the channel type for copying.
Device preset:
Click "Preset" in the menu bar of the main interface of the software, and the device preset interface will
pop up.
As shown in the above picture, the left side of the preset interface is the gear position, among which "0
automatic gear" is the system gear position, which automatically saves all parameters; "1 (default)" is the
default file of the device, which can only be recalled, and cannot be deleted or overwritten. The parameters
will all be restored to the factory default parameters; other gears can be freely saved, recalled, deleted
and other operations.
The function buttons on the right side of the preset interface are as follow:
Save: Save the existing device parameters to the corresponding selected preset.
31