Mark MDX 0408 Manual Del Usuario página 30

entire device. If the device is online, the leftmost position will turn green . The remove button can
be used to remove the device directly in the software. If you need to debug different devices, you can
click to select the target device, and the function interface will switch to the device function page.
Add device:
Click "File"- "New Device" in the menu bar of the main software interface, and the following Add Device
Interface will pop up. Select the virtual device model to be added and add it to the device list. Note: The
virtual device will not connect to the real device.
Device Management:
Click "Device"- "Device " in the menu bar of the main software interface, and the device management
interface will pop up.
As shown in the figure above, the device information content displayed on the target device management
interface can be selected in the device list at the top. The device management interface is divided into
three parts as follows:
29