Mark MDX 0408 Manual Del Usuario página 5

DISPLAY FUNCTION
1. Device name: The user can customize and modify the name throught the control software or the
lower computer.
2. Current gear: The preset currently applied by the device.
3. Device IP: When the device is connected to the software via TCP/IP, the device and the computer
must be in the same IP domain, for example, the device IP is 169.254.xxx.xxx, and the computer IP
should be 169.254.xxx.xxx.
4. Device firmware version: display the firmware version burned by the device.
①Press MENU, it will show menu list, using NEXT or BACK to select functions: GLOBAL MEMORY, INPUT
SECTION, MATRIX, SYSTEM, press QUIT to exit.
Functions in panel
1.GLOBAL MEMORY
2.INPUT SECTION
3.MATRIX
4.SYSTEM
Menu list
RECALL a Memory
STORY a Memory
DELETE a Memory
A ANALOG
B ANALOG
C ANALOG
D ANALOG
Routing Out.1=Input A*....
1 IP SET
2 RENAME
3 DSP VERSION
Remark
Long press such output channel button under LED to
change.
4