Mark MDX 0408 Manual Del Usuario página 31

Software information: display the current device's upper and lower computer version number and date
information.
Device information: display the current device name and device grouping, among which "device name"
can be entered in the new name and then click the button to save.
Device IP information: If the current device is connected with network information, the IP address, gateway,
and MAC address of the device will be displayed here. The IP and gateway can be modified and click the
OK button to save and restart the device network module, which newly entered network information will
take effect immediately.
Channel name management:
Click "Device"- "Channels Names" in the menu bar of the main software interface, and the Channel Name
interface will pop up.
As shown in the figure above, after entering the new name of the channel in the corresponding channel,
click the OK button to save and update the name of the channel immediately. Note that the length of the
channel name is limited to 5 English letters and numbers.
Channels copy:
Click "Device"- "Channels Copy" in the menu bar of the main software interface, and Channels Copy
interface will pop up.
30