Publicidad
Idiomas disponibles
Idiomas disponibles
3. Click
to choose BYPASS type or PEQ type.
4. Threshold, Q value, Ratio, Max Gain, Attack, Frequency, and Release time for the DEQ
corresponding parameters, which can be set by modifying the numeric box value.
Input delay:
Double-click in the module button
, input delay function interface will pop up.
As shown above, the delay lists all input channels control content, drag the left slider can directly adjust
the delay value corresponding to the channel, box or value corresponding to the input values, the right
side of the switch delay function , Red is off, green is on, the reset button on the far right can directly reset
the default value
of the channel delay.
Input and output with FIR:
Double-click in the function button
, FIR function page will pop up. Upper right corner can zoom
the interface.
When user uses PEQ to adjust audio signal and set a linear magnitude, he can find the phase of signal
changed, due to IIR filter. However, DSP products provide user a useful tool FIR filter to adjust audio signal
with a linear phase.
21
Publicidad
