Mark MDX 0408 Manual Del Usuario página 19

Preset: save all the setting parameters of the equalizer of the current channel to the computer, and recall
the channel equalizer parameters of the computer, which can be called across channels and devices.
Copy: copy the current channel equalizer parameter value, which can be pasted to other similar channels
(such as input channel parameters can only be copied to other input channels).
Paste: used in combination with the copy button to paste the last copied equalizer parameter value to the
current channel.
Reset: reset the equalizer parameters to the default parameter values
Multi-channel EQ curve display
As shown in the figure above, the left side is the interface switching button for each channel.
Click to switch the EQ channel, and the color is the currently selected channel. is the curve color of
the EQ channel. For each channel's EQ curve display switch, check it to enable it to display the curves
of other channels in the current channel interface.
EQ curve chart:
As shown in the figure above, it is used to control and display the current channel EQ curve. The
corresponding multi-segment control points in the chart can be adjusted by clicking the left mouse button
18