Publicidad
Idiomas disponibles
Idiomas disponibles
7. Analogue Radio VHF/Medium Wave (FM/AM)
Select one of the FM1, FM2, FMT or AM sources/memory
levels using the SRC button or the FM/AM buttons
Tip: some memory sources/levels are inactive
depending on the setting; for example, only the FM1
memory level is active by default. See "SETTINGS".
Tip: there are 5 memory slots available for each
memory level.
Station search
Press << or >> on the multifunction rocker switch to start
searching for channels down or up. The search stops
automatically at the next station found.
Tip: the search sensitivity can be set in the settings, see
"SETTINGS".
You can also set the frequency manually if your desired
station signal is too weak and the search does not stop at
the desired frequency. To do this, press the buttons on
the multifunction rocker switch or until the desired
frequency is tuned.
PTY search (FM only)
If the PTY (program type) function is active (see
"SETTINGS"), press the FR/FF buttons to start the search
for a preset PTY ID (presetting PTY types, see "SETTINGS").
Storing/selecting saved stations
You can save your favourite stations in the station
memory using the 1-5 buttons. Each memory level can
store up to 5 stations.
Follow the procedure in "STATION SEARCH" to set the
desired station. Then press and hold the preset station
button for the selected station for more than one second
until you can hear a sound acknowledging that the station
has been saved; after the beep, release the button.
You can recall your saved station by briefly pressing the
preset station button.
Publicidad
