Publicidad
Idiomas disponibles
Idiomas disponibles
Unplugging USB storage device/microSD card
If needed: open the flip cover by pulling lightly from the
bottom by the protruding bottom edge.
Unplug the USB data carrier carefully or
gently press on the microSD card (for
example, with your fingernail) until it is
unlocked (audible click). Ensure you do not let go
of the card suddenly, as this can cause it to pop
out and get lost. Remove the microSD card
carefully from the reader. In case of difficulties, you
can use tweezers, for example.
10. Playback from External Devices and Media: iPod/iPhone
Apple iPod/iPhone
This car radio has two USB ports compatible with Apple's
iPod/iPhone.
Find the USB port behind the flip cover on the front of the
•
car radio (see "CAR RADIO CONTROLS")
Find the USB port on the back panel of the car radio (see
•
"INSTALLATION")
Tip: never remove the data carrier without first turning
the radio off, otherwise the data carrier or the data on it
may be damaged.
Tip: if you plug microSD cards or small enough USB
flash drives, you can close the flip covers.
Never close the flap if the microSD card is not fully inserted
or the USB flash drive is too large.
When using small USB flash drives or microSD cards, keep
in mind that, depending on the shape, they may be
difficult to grasp for removal again. In such cases, do not
use force or any pointed/sharp objects that could damage
the car radio!
Connecting an iPod/Apple iPhone/Starting playback
Insert the iPod/Apple iPhone connection cable into the USB
port carefully, do not force or bend the connector.
The radio will automatically switch to the Apple's
iPod/iPhone mode.
Playback starts with the last file played on the iPod/iPhone
or with media playback from the last application used.
If an Apple iPod/iPhone is already connected, use the SRC
or the USB button to switch to the IPOD source to start
Publicidad
