9. Playback from External Devices and Media: USB/microSD
Overview
Data media/media types used:
USB storage media with FAT16, FAT32, exFAT file system
•
File formats: MP2, MP3, WMA, FLAC, M4A (AAC), APE, WAV
•
Tip: the trouble-free functioning of all media files,
including those listed above, cannot be guaranteed due to
the variety of software these files may be created with.
Tip: the USB port supports USB storage media (also
known as USB sticks) which are classified as Mass Storage
Devices (MSD). Direct connection of MP3 players or cell
phones to play music is not possible.
USB/microSD
This car radio has two USB ports and a microSD reader.
Find the USB port behind the flip cover on the front of the
•
car radio (see "CAR RADIO CONTROLS")
Find the USB port on the back panel of the car radio (see
•
"INSTALLATION")
Find the microSD reader behind the flip cover on the front
•
of the car radio (see "CAR RADIO CONTROLS")
Connecting USB storage media/starting USB playback
Open the flip cover by pulling lightly from the bottom by
the protruding bottom edge.
Plug the USB data carrier into the USB port carefully
without forcing or bending the USB data carrier.
The radio automatically switches to the USB mode. The
data is loaded and the playback begins with the first
media file recognised by the radio.
If a USB data carrier has been connected before, switch to the
USB source with the SRC button or the USB button; the car
radio will resume playback from the last track played.
Inserting a microSD card/starting microSD playback
Open the flip cover by pulling lightly from the bottom
by the protruding bottom edge.
Slide the microSD card into the card reader with the
contacts facing down until it clicks into place. Be careful
not to let go the card before it snaps, otherwise it may pop
out and get lost. Do not force or twist the card when
inserting it. The radio automatically switches to the SD