Blaupunkt Frankfurt RCM 82 DAB Instrucciones De Uso página 91

Settings and/or preset stations are lost, the time
is not displayed properly
As a rule, the car radio saves the settings permanently,
even without power supply. However, some settings are
not permanently saved until properly turned off, so make
sure you properly turn off your car radio.
The functions such as the time, last source, last USB/CD
playback position require constant power supply. For
proper operation, the car radio must be properly
connected to a permanent power source which must not
be interrupted.
In addition, some radio stations may transmit incorrect
time signal via RDS. If this is the case, disable the RDS
function responsible for the time in the menu, and set
the clock manually.
The car radio does not receive a radio signal or
the signal is weak
Check the antenna for your reception range.
Check if a phantom power supply adapter may be
needed.
Is the antenna installed correctly? Many antennas require
a counterpole (car body).
LED lights or other electrical components may interfere
with radio reception, so such interference should be
excluded.
When using the car radio for the first time, make sure the
radio is set to the correct radio region (see "SETTINGS").
NO SIGNAL or NO SERVICE is suddenly displayed
in the DAB mode
The current MULTIPLEX (program package) signal is too
weak and audio signal decoding is not possible. Select
another MULTIPLEX or check the DAB antenna.The radio
suddenly displays SEEK PI (SUCHE PI)/ SEEK TA (SUCHE
TA) or changes stations during operation
Check your antenna and car radio settings. If necessary,
deactivate the alternative frequency function (see
"SETTINGS").
If the communication radio function has been enabled,
poor reception may cause the radio to change stations
itself, disable the communication radio function or select
another station.
The car radio displays station name in the radio
mode incorrectly
Adjust the display as required with the DIS button. Check
reception (check the antenna).
Note: some stations send additional information instead
of the RDS station name; this is not affected by the radio.
USB, CD, SD or other storage media do not work
Check other storage media for correct functioning,
format storage media, and play different files.