ST AB 500 Li 48 Manual De Instrucciones página 134

8. Never run, always walk.
9. Always keep your face,
hands, and body away from
the intake grille and air outlet
and do not obstruct the
airways both when starting
and utilising the machine.
10. The rotating parts can
cause serious injuries; avoid
contact with these parts
while they are still rotating.
• If something breaks or an
accident occurs during work,
turn off the motor immediately
and move the machine away
to prevent further damage;
if an accident occurs with
injuries or third parties are
injured, carry out the first aid
measures most suitable for
the situation immediately and
contact the medical authorities
for any necessary health
care. Carefully remove any
debris which could cause
damage or injury to persons
or animals if ignored.
• Prolonged exposure to
vibrations can cause injuries
and neurovascular disorders
(also called "Raynaud's
syndrome" or "white finger"),
especially to people suffering
from circulation disorders.
The symptoms can regard
the hands, wrists and fingers
and are shown through loss
of sensitivity, torpor, itching,
pain and discolouring of or
structural changes to the skin.
These effects can be worsened
by low ambient temperatures
and/or by gripping the hand
grips excessively tightly. If
the symptoms occur, the
length of time the machine
is used must be reduced
and a doctor consulted.
Restrictions of use
1. Do not use the machine
if you are unable to hold it with
both hands or keep steady
on your legs while working.
2. Never use the machine
with damaged, missing or
incorrectly positioned
3. Never use the
machine without having
installed all the attachments
required for each use.
4. Never disengage,
deactivate, remove or tamper
with the safety systems/
micro switches installed.
5. Do not use the power
tool if the switch does not
turn it on and off. Any power
tool that cannot be controlled
with the switch is dangerous
and must be repaired.
6. Do not strain the machine
too much and do not use a
small machine for heavy-
duty work; if you use the right
machine, you will reduce the
risk of hazards and improve
the quality of your work.
2.4 MAINTENANCE,
STORAGE
Ensure regular maintenance
and correct storage to
maintain machine safety and
high performance levels.
Maintenance
• Never use the machine with
worn or damaged parts.
Faulty or worn-out parts
must always be replaced
and never repaired.
EN - 4
guards.