Sound Menu - Yamaha YSP-1100 Manual De Instrucciones

MANUAL SETUP
IMAGE LOCATION (Image location)
Use to adjust the direction from which the front left and
right channel sound is heard so that the each sound can be
heard closer to the center channel.
Use this feature to redirect audio signals if the sound
coming from the front left and right seems unnatural, such
as when your listening position is not the center of your
listening room.
You can only adjust this parameter when 3 beam or 5
beam is selected as the beam mode (see page 42).
Choices: ON, OFF
Setting range: 0% to 95%
Initial setting: 0%
C)IMAGE L CATI N
.
L
LEFT;;;;;;;;;;;0%
RIGHT;;;;;;;;;;0%
[ ]/[ ]:Up/Down [ ]/[ ]:Sel
[ENTER]:Return
LEFT (Left)
Adjusts audio signals towards the left.
The higher the percentage, the louder the output from the
center.
Without adjustment
RIGHT (Right)
Adjusts audio signals towards the right.
The higher the percentage, the louder the output from the
center.
Without adjustment
66
En
FF N
C R
p
With the front left
channel adjusted
With the front right
channel adjusted

SOUND MENU

Use to manually adjust various parameters related to the
sound output.
SET MENU → MANUAL SETUP → SOUND MENU
1)SOUND MENU
)TONE CONTROL
B)SUBWOOFER
C)MUTE LEVEL
D) UDIO
E)ROOM
F)DD/DTS
[ ]/[ ]:Up/Down
[ENTER]:Enter
TONE CONTROL (Tone control)
You can adjust the tonal quality of the sound beams.
A)TONE CONTROL
.
TREBLE;;;;;0dB
BASS;;;;;;;0dB
[ ]/[ ]:Up/Down [ ]/[ ]:Sel
[ENTER]:Return
TREBLE (Treble)
Use to adjust the high frequency response.
Choices: –12 dB to +12 dB
Initial setting: 0 dB
BASS (Bass)
Use to adjust the low frequency response.
Choices: –12 dB to +12 dB
Initial setting: 0 dB
SET
DEL Y
EQ
Dynamic Range
- +
------
- +
------
p