RFX Rower 2.0 Instrucciones De Montaje página 14

5
Press button A down and insert the leg supports under the cover of the baseboard B.
Release the button to lock the leg supports. Later, you can adjust the position of the leg supports to your
individual needs so that you can support your feet optimally.
A
B
B
6
Attach both wheels to the outer side of the rails, as shown in the diagram.
Trails
Leg supports
Trails
Tank
25
7
Place the device in an upright position.
Place the strap correctly over all guide wheels and hang the ring on the Bungee cord hook, as shown in the
diagram.
INCORRECTLY CORRECTLY
installed belt installed belt
Bungee rope
Belt
! IMPORTANT !
The strap must lie correctly over the guide wheels!
Before use, check that all screws and nuts are tight!
26