8
MAINTENANCE
8.1
Daily, by a trained user
(fig.15)
A. Place the heads and the knives in the lowered position and clean the tank and the lid.
B. Press the knife cleaning button to raise the knives.
C. Activate the emergency stop, isolate the machine and clean the knives.
D. Release the emergency stop and reconnect the machine.
E. Press the green button to raise the heads and clean out dough and flour residues with a
vacuum cleaner.
8.2
Weekly, by a trained user
(fig.16)
A. Press the knife raise button to raise the knives.
B. Activate the emergency stop, isolate the machine and remove the side doors using a
screwdriver.
C. Using a vacuum cleaner, clean all over the inside of the machine as well as the mechanical
components.
D. Refit the side doors and empty the flour recovery bin.
E. Wash the entire exterior with a damp cloth.
F. Release the emergency stop and reconnect the machine.
8.3
Six-monthly, by an approved agent
A. Place the heads in the lowered position.
B. Activate the emergency stop, isolate the machine and remove the right-hand side door using a
screwdriver.
C. Check the oil level (the level must be between 4 and 5 cm from the top edge of the aluminium
flange).
NOTE: Below you will find a non-exhaustive list of compatible hydraulic oils:
CONDAT
ELF
CASTROL
TOTAL
D. Release the emergency stop and reconnect the machine.
E. Check that your approved agent has recorded his work in order to maintain your 5-year
warranty cover.
HYDROLUB S46
HYDRELF DS46
AYSPIN AWS46
AZOLLA ZS32
13
English
9
CONSUMABLES
When ordering spare parts, check with your approved agent which part is required based on the
spare parts catalogue issued by the manufacturer.
Always specify the machine serial number as shown on the nameplate.
Your agent will place the orders with JAC.
9.1
List of CONSUMABLES
ITEM CODE
NEW DESCRIPTION
F1500009
LID SEAL
F1500004
LID SPRING NG
F1513364
CLICK&CUT SPRING RH
10040012
WEAR PLATE
HUILEHYDROS46 CONDAT HYDRAULIC OIL S46
F140000311
DOUBLE EXCENTRIC
F1513326
LOCK PIN
English
MODEL
DIV-R, TRADIFORM, PANIFORM
DIV-R, DIVIFORM+, TRADIFORM, PANIFORM
DIVIFORM, DIVIFORM+, TRADIFORM, PANIFORM
DIV-R, DIVIFORM+, TRADIFORM, PANIFORM
ALL
DIV-R, DIVIFORM+, TRADIFORM, PANIFORM
DIVIFORM, DIVIFORM+, TRADIFORM, PANIFORM
14