A supply cable/ adapter 6.648-582 is re-
quired for both the chargers.
Batteries and chargers are available in spe-
cialised stores.
Unloading
Danger
Risk of injury. Press emergency-stop
switch to immediately switch off all func-
tions of the machine.
Insert batteries and connect (see "Be-
fore Start-up").
Place long lateral boards of the packag-
ing as a ramp next to the pallet.
Fix the ramp on the pallet with nails.
Place short boards as a support under-
neath the ramp.
Remove the wooden bars in front of the
wheels.
Lift cleaning head with pedal and re-
move the carton packing.
Set main switch to "1".
Press the driving lever and slowly move
the machine down from the ramp.
Set main switch to "0".
Operation
Danger
Risk of injury. Press on the foot pedal only
with one foot. The other foot must firmly be
placed on the floor. Press emergency-stop
switch to immediately switch off all func-
tions of the machine.
Driving
Warning
Risk of damage. The vacuum bar must be
liften to move in reverse direction.
Note
The machine is designed in such a way that
the brush head protrudes on the right. This
helps in working in a proper way even close
to the edges.
Release emergency-stop button by
turning.
Insert key in key switch at the operator
console and turn to "1".
Release parking brake (optional); move
the pedal downward and turn to the left.
Then let the pedal move upwards.
Drive the machine.
Forwards:
Press the driving lever to the front.
Backward:
Press the driving lever to the rear.
Stop the machine: Release driving le-
ver.
Note
The machine moves only when the driving
lever is moved by 15°.
Adjust cleaning speed
BR 55/60 W
– Forwards:
Turn the info button clockwise until
"CleanSpd Fwd=xxx%" is displayed.
– Backward:
Turn the info button clockwise until
"CleanSpd Rev=xxx%" is displayed.
27
English