Eaton Tripp Lite Serie Manual Del Propietário página 11
Ocultar thumbs
Ver también para Tripp Lite Serie:
- Manual del propietário (140 páginas) ,
- Manual del usuario (96 páginas) ,
- Manual de instalacion y uso (78 páginas)
Publicidad
Idiomas disponibles
Idiomas disponibles
Installation
B127A-002-BHPH2
Up to 230 ft. (70 m) Cat6 cable at 4K/60 Hz
1
Up to 15 ft. (4.5 m) HDMI 2.0 cable at 4K/60 Hz
2
HDR PLAYER
1. Make sure all equipment in the installation—such as TVs, Blu-
ray™ players and the transmitter—is powered OFF.
2. Using an HDMI 2.0 cable (such as P569-XXX-CERT or
P568-XXX-2A Series cables), connect the HDMI source to the
INPUT port on the local transmitter unit.
3. Optional: For extended range, connect up to two
B127A-010-H signal repeater units to the splitter and each
receiver via Cat6 cabling.
4. Using Cat6 cable (such as N202-Series 24 AWG Cat6 Cabling),
connect the RJ45 port on the local splitter unit to the RJ45
port on the remote receiver unit.
B127A-1P0-PH
B127A-002-BH
B127A-1P0-PH
11
Publicidad
