Eaton Tripp Lite Serie Manual Del Propietário página 18

Installation
Standard Splitter Kit Installation
(8-Port Model)
Notes:
1) Test to ensure the entire installation works properly before pulling cables
through ceilings/walls.
2) To achieve maximum distance and performance, use 24 AWG solid wire
Cat6 cable. Using stranded wire Cat6 cable or cable with a gauge (AWG)
size higher than 24 AWG will result in shorter extension distance. Higher
gauge cabling, such as 26 AWG, has a more limited transmission capability
than lower gauge cabling. N202-Series Cat6 cables are made with 24 AWG
solid wire cabling.
3) The installation diagram shows a B127A-008-BH splitter unit with
an assortment of B127A-Series receivers, including B127A-1A0-BH, B127A-
1P0-PH and B127A-1A0-FH (sold separately at Tripplite.Eaton.com).
4) External power is not required for remote receiver units because of
Power over Cable (PoC) technology incorporated in the transmitter unit.
18