Eaton Tripp Lite Serie Manual Del Propietário página 9

Installation
Standard Splitter Kit Installation
(2-Port Models)
Notes:
1) Test to ensure the entire installation works properly before pulling cables
through ceilings/walls.
2) To achieve maximum distance and performance, use 24 AWG solid wire
Cat6 cable. Using stranded wire Cat6 cable or cable with a gauge (AWG)
size higher than 24 AWG will result in shorter extension distance. Higher
gauge cabling, such as 26 AWG, has a more limited transmission capability
than lower gauge cabling. N202-Series Cat6 cables are made with 24 AWG
solid wire cabling.
3) The first installation diagram shows a B127A-002-BHPH2 kit, which
includes a B127A-002-BH splitter unit and two B127A-1P0-PH receiver
units. The second diagram shows the B127A-002-BH splitter used with
an included B127A-1P0-PH receiver and B127A-1A0-BH receiver (sold
separately at Tripplite.Eaton.com).
4) External power is not required for remote receiver units because of
Power over Cable (PoC) technology incorporated in the transmitter units.
9