Publicidad
Idiomas disponibles
Idiomas disponibles
Chapter 3
Operating Instructions
The charger pockets accommodate either a radio with an attached Motorola Solutions-approved battery, or a
Motorola Solutions-approved battery alone. Batteries charge best at room temperature.
Prerequisites:
NOTE: To ensure optimized charging performance, turn off the radio while charging.
Procedure:
1. Plug the round end of the power supply cord into the power receptacle (1) at the back of the charger.
2. Plug the wall receptacle end of the power supply cord into the appropriate Alternating Current (AC)
outlet.
A successful power-up sequence is indicated by a single green blink on the charger indicator. Refer to
the
Charging Indicators on page
3. Insert a Motorola Solutions-approved battery, or a radio with a Motorola Solutions-approved battery
into the charger pocket.
a. Align the battery contacts with the charger contacts.
b. Press the battery into the pocket, ensuring complete contact.
Once the Motorola Solutions-approved battery is properly seated into the pocket, the charger indicator
illuminates, indicating the charger has recognized the presence of the battery.
4. To remove a radio or Motorola Solutions-approved battery from the charger, pull straight up until the
battery completely clears the charger housing.
3.1
Battery Locating Rail Adapter
The battery locating rail is a removable part which constitutes an adapter to accommodate standard and
slimline batteries. The charger is shipped with the battery locating rail in the standard battery position.
When and where to use: Charging slimline battery.
1
16.
MN009994A01-AC
Chapter 3: Operating Instructions
15
Publicidad
