Descargar Imprimir esta página

Motorola Solutions WPLN4137 Guia Del Usuario página 18

Cargador para una unidad
Ocultar thumbs Ver también para WPLN4137:

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 40
MN009994A01-AC
Chapter 4: Troubleshooting
Chapter 4
Troubleshooting
Table 5: Troubleshooting
Problem
What it means...
No LED indication
Blinking red indica-
tion
Blinking yellow in-
Battery is waiting to charge. The battery
dication
temperature might be below 5 °C (41 °F)
or above 40 °C (104 °F) or the battery
voltage might be lower than the predeter-
mined threshold level for rapid charging.
18
No charger contact.
No power to the charger.
No charger contact.
Battery is not chargeable.
What to do...
Check that the radio with battery or
the battery is inserted correctly.
Make sure that the power cord is
securely plugged into the charger
and an appropriate AC outlet, and
that there is power to the outlet.
Remove the battery from the charger
and replace it back into the charger.
Verify that the battery is a Motoro-
la Solutions authorized battery lis-
ted in
Motorola Solutions Author-
ized Batteries on page 12
batteries might not charge.
Remove the battery from the
charger, and clean the charging
contact at the back of the battery
using pencil eraser.
Replace battery.
When this condition is corrected, the
battery charges automatically.
NOTE: Rapid charging out-
side of the stated tempera-
ture and voltage limits can
drastically reduce the life ex-
pectancy of the battery.
NOTE: When the battery
charger detects the proper
battery conditions, rapid
charging begins automatical-
ly (steady red LED).
. Other

Publicidad

loading