Publicidad
Idiomas disponibles
Idiomas disponibles
Before using the battery charger, read all the instructions and cautionary markings on the charger, the battery,
and the radio using the battery.
WARNING:
●
To reduce the risk of damage to the power cord, pull the plug rather than the cord when
disconnecting power cord from the AC outlet or the charger.
●
To reduce the risk of fire or electric shock, avoid using an extension cord. If an extension cord must
be used, ensure that the cord size is 18 AWG for lengths of up to 100 ft (30.48 m), and 16 AWG for
lengths up to 150 ft (45.72 m).
●
To reduce the risk of fire, electric shock, or injury, do not operate the charger if it is broken or
damaged in any way. Take it to a qualified Motorola Solutions service representative.
●
To reduce the risk of fire or electric shock, do not disassemble the charger. It is not repairable and
replacement parts are not available.
●
To reduce the risk of electric shock, unplug the charger power adapter from the AC outlet before
attempting any maintenance or cleaning.
●
To reduce the risk of injury, charge only the rechargeable authorized batteries. Other batteries may
explode, causing personal injury and damage.
●
To reduce the risk of fire, electric shock, or injury, only use the accessories recommended by
Motorola Solutions.
●
Changes or modifications made to this device, not expressly approved by Motorola Solutions, could
void the authority of the user to operate this equipment.
Operational Safety Guidelines
The followings are the operating guidelines for the charger.
●
This equipment is not suitable for outdoor use. Use only in dry locations and conditions.
●
Maximum ambient temperature around the charger must not exceed 40 °C (104 °F).
●
To ensure optimized charging performance, turn off the radio while charging.
●
Connect the charger to an AC outlet using only a Motorola Solutions Authorized Power Supplies. See
Motorola Solutions Authorized Power Supplies on page
●
The AC outlet to which the power supply is connected must be nearby and easily accessible.
●
Ensure that the power supply cord connected to the charger is not easily stepped on, tripped over, or
subjected to water, damage, or stress.
●
Connect the power supply only to an appropriately fused and wired AC outlet with the correct voltage, as
specified on the product.
●
Disconnect from the line voltage by removing the power supply from the AC outlet.
●
Connect not more than the appropriate number of charger power supplies to a 15 A and 20 A circuit, as
limited by any certified power strip used.
●
The equipment shall be connected to a nearby and easily accessible socket outlet.
12.
MN009994A01-AC
Safety and Legal
5
Publicidad
