Press the two fixing pins of the base plate
into the recesses to fix the base plate in
place.
Check the new dust bag for any damage.
Open the top cover of the self-empty base.
Check that the pre-assembled dust bag is
correctly seated.
Close the top cover of the self-empty base.
Position the self-empty base / charging sta-
tion on a wall with a level surface and avoid
direct sunlight.
Ensure that the required clearance of ap-
prox. 0.5 m to the sides and approx. 1.5
m to the front is maintained and that the
charging contacts for the robot vacuum
cleaner are freely accessible.
Insert the mains plug into the socket.
198