Publicidad
Idiomas disponibles
Idiomas disponibles
11.5. Cleaning the charging contacts
Disconnect the charging station and the robot vacuum and mop completely
from the power supply.
Clean the charging contacts of the charging station and the robot vacuum and
mop with a suitable dry cloth.
12. Longer periods without use
If the robot is not in operation for a longer period of time, fully charge the bat-
tery, pull out the mains plug, clean the appliance and store it in a dry place pro-
tected from direct sunlight.
13. Troubleshooting
If the appliance malfunctions, the operating LED flashes red and a corresponding
announcement sounds. First, please check whether you can remedy the problem
yourself using the following overview.
Never attempt to repair the robot vacuum and mop or the self-empty base your-
self. If a repair is necessary, please contact our Service Centre or a suitable au-
thorised repair workshop.
Fault
There is a fault with
the front
collision sensor.
There is a fault
with one of the
wheels.
There is a fault with
the side brush.
There is a fault with
the main brush.
Vocal message
Error 1 :
Front bumper stuck.
Error 2:
Wheel stuck. Check
the wheel and move
it to a new position.
Error 3:
Side brush stuck.
Error 4:
Rolling brush stuck.
Remove and clean
the rolling brush.
Possible
cause
Remove any dirt or
Bumper is
blocked.
Check the left, right
One of the
wheels is dirty or
blocked.
Remove any dirt or
Remove any dirt or
Side brush is
dirty or blocked.
Remove any dirt or
Brush roller is
dirty or blocked.
Solution
blockages.
and front drive
wheel
blockages.
blockages.
blockages.
213
DE
FR
NL
ES
IT
EN
Publicidad
