Publicidad
Idiomas disponibles
Idiomas disponibles
11.4. Cleaning the suction opening and brush
After using your robot vacuum and mop for some time, dirt and dust may accumu-
late around the suction opening and reduce vacuum power. To keep the vacuum
power constant, the suction opening should be cleaned at regular intervals.
Switch off the appliance and place it on a flat
surface.
Press both locking tabs on the brush frame in-
wards and lift the brush frame off.
Remove the brush upwards from the suction
opening.
Remove dirt and dust on and in the suction
opening with a damp wiping cloth.
If long hairs or threads have become wrapped around the brush, cut them and
then brush the brush thoroughly.
Now put the brush back into the opening.
Press the brush frame back onto the suction
opening.
212
Publicidad
