FLAEM Aspira Go P1611EM-20 Instrucciones De Uso página 20

INFORMATION ON RESTRICTIONS OR INCOMPATIBILITIES WITH CERTAIN SUB-
STANCES.
• Interactions: The materials used for contact with secretions are thermoplastic polymers with high stability and chemical resistance
(PP, PC, SI). However, interactions cannot be excluded. Therefore, it is recommended to: a) Always avoid prolonged contact of the
liquid with vessels or tubes, sanitise immediately after use. b) If abnormal situations occur, e.g. softening or cracking of accessories,
quickly terminate operation and replace the materials used. Contact the authorised service centre specifying the method of use.
ASPIRATOR TECHNICAL SPECIFICATIONS
Model
Voltage
Internal battery included:
Battery autonomy:
Appliance dimensions:
Weight:
Usage:
APPLIED PARTS
Type BF applied parts are:
Aspiration:
Adjustable vacuum level:
Max. air flow:
Noise level (at 1 m)
Battery charging time
Ambient temperature for battery
charging
P1611EM-20
12V
14.4V;
2200/2500/2600/2750/
2800/3000/3120 mAh
Approximately 50 minutes
36(L) x 14(D) x 27(H) cm
2.5 kg
30 minutes ON/ 30 minutes OFF
If necessary, a sterile cannula can be attached to the connection of the MANUAL
ASPIRATED FLOW CONTROL (15).
high vacuum/high flow
-0.10 to -0.80 bar (approx.)
(accuracy class 2.5)
20 l/min (approx)
63 dB (A) (approx)
7 hours (minimum)
10° C to 35° C
20
P1611EM-30
12V
14.4V;
2200/2500/2600/2750/
2800/3000/3120 mAh
Approximately 40 minutes
36(L) x 14(D) x 27(H) cm
2.5 kg
30 minutes ON/ 30 minutes OFF
high vacuum/high flow
-0.10 to -0.85 bar (approx.)
(accuracy class 2.5)
30 l/min (approx)
62 dB (A) (approx)
4 hours (minimum)
10° C to 35° C