FLAEM Aspira Go P1611EM-20 Instrucciones De Uso página 21

ENVIRONMENTAL CONDITIONS
Operating conditions:
Ambient temperature
Relative air humidity
Atmospheric pressure
Storage and transport conditions:
Ambient temperature
Relative air humidity
Atmospheric pressure
DURATION
Model: 1611EM-20 and 1611EM-30
(Vacuum unit)
Model: ASP-2 and A005 (Accessories)
APPLIANCE AND MATERIAL INFORMATION
The equipment includes:
1) ASPIRATOR
2) SWITCH
3) VACUUM GAUGE
4) VACUUM ADJUSTMENT KNOB
5) AIR INLET
6) CONNECTION PIPE - Ø 13 x 7.5 mm L 1300 mm
8) CONNECTION PIPE -
7) HYDROPHOBIAL ANTIVIRAL/ ANTIBACTERIAL FILTER (SINGLE USE) (device not manufactured by FLAEM)
9) COLLECTION VESSEL -with complete cap
10) PROTECTIVE DEVICE
11) VESSEL CLOSURE CAP
12) VESSEL 'VACUUM' SOCKET
13) VESSEL 'PATIENT' SOCKET
14) LID PROTECTION CAPS
15) MANUAL ASPIRATED FLOW CONTROL - (disposable) (device not manufactured by FLAEM)
16) ASPIRATOR CANNULA. (NOT SUPPLIED WITH THE DEVICE). The cannula is not supplied and is
not available as a spare part for the medical device. Any cannulae to be used with our aspirators
must be of a shape adaptable to the 'MANUAL ASPIRATED FLOW CONTROL' connection supplied
with the aspirator.
17) ACCESSORY COMPARTMENT
18) EXTERNAL POWER SOCKET
19) MULTI-VOLTAGE POWER SUPPLY
20) CIGARETTE LIGHTER CABLE
IMPORTANT NOTE: There is an identification label on the packaging, remove it and affix it in the spaces provided on page 2. When
replacing the Nebuliser and accessories, perform the same procedure.
Between 0°C and +35°C
Between 10% and 95%
Between 69 KPa and 106 KPa
Between -5°C and +45°C
Between 10% and 95%
Between 69 KPa and 106 KPa
Service life 550 hours
Average life expectancy is 1 year
Ø 13 x 7.5 mm L 280 mm
21
Information on
Model
materials
P1611EM-20
P1611EM-30
A005 Silicone
Polycarbonate
Polypropylene+ Silicone
Polypropylene + ther-
moplastic elastomers
ASP-2