Silvercrest SMG 2.4 D2 Instrucciones De Uso página 16

NOTE
If you find the application unpleasant, try reducing the
►
speed, adjust the pressure applied, change to a differ-
ent part of the body or stop the massage completely.
If position 1 is selected, the operating/charging
►
LED flashes green once before it lights up green.
3
If position 2 is selected, the operating/charging LED
flashes green twice before it lights up green.
♦ To switch the appliance off, push the switch 2 back to the 0
position.
Cleaning
RISK OF ELECTRIC SHOCK
► Disconnect the mains adapter from the mains power socket
before cleaning the appliance. Disconnect the charging
cable from the appliance.
► Switch off the appliance before cleaning.
CAUTION! PROPERTY DAMAGE!
► Ensure that no moisture can get into the appliance during
cleaning.
■ For easier cleaning, pull the massage rollers 5 off of the
appliance. Clean them in warm water with a little mild soap.
Rinse off the soap residues thoroughly and allow the massage
rollers 5 to dry in the air. When they are dry, push them back
onto the drive shaft of the massager.
SMG 2.4 D2
GB │ IE │
13
3
■