Maintenance and Care
Check and replace the fuse
Power off the vehicle, remove and check the fuse. If the fuse
is blown, replace it with a fuse of the same specification. See
Specifications (page 9) for fuse specifications.
The detailed steps are as follows:
1. Remove the driver seat cushion.
2. Open the fuse box cover.
3. Use the fuse puller of the fuse box to pull out the fuse one
by one, find the blown fuse, and replace it with a spare fuse
of the same specification and model.
Blown fuse
Replacing a fuse with a different specification from
the original fuse will increase the probability of
Attention
vehicle damage.
50
4.5. Throttle handle
Please turn off the engine first when checking the free stroke
of the throttle handle. Turn the throttle handle to confirm
whether it can smoothly turn from full close to full open at all
steering handle positions, and rebound smoothly without
jamming, and the free stroke is accurate.
If the operation of the throttle handle is not smooth, the free
stroke is not within the standard value, or the throttle handle
cable is damaged, please send it to the designated repair
shop for repair and replacement in time.
Throttle handlebar free travel: 2-6 mm
Free travel
Free travel