Publicidad
Idiomas disponibles
Idiomas disponibles
6.1. Motorcycle maintenance
6.1.1. Vehicle cleaning
Keeping the appearance of the vehicle clean regularly can
not only keep the vehicle in good condition, but also find the
faults that are easy to ignore at ordinary times, which helps to
prolong the service life of the vehicle.
1. Wait for the engine, radiator, silencer, front and rear brakes
and other high-temperature parts to cool to room tempera-
ture before cleaning.
2. If necessary, use a sponge or soft towel dipped in a soft
detergent to remove dirt. Special care must be taken when
cleaning the headlight lenses, panels and other plastic
components to avoid scratching the surfaces and to avoid
water entering the electrical components and air filters.
3. After washing the surface of the vehicle, wipe it clean with
a clean soft cloth.
4. Wax the plastic appearance parts, and lubricate the chain
and other moving parts with lubricating oil to prevent
corrosion.
6. Other Information
• It is forbidden to use high-pressure water gun for
Attention
cleaning.
• Do not flush the silencer with water to prevent
water from entering the silencer.
• After cleaning, use the front and rear brakes intermittently at low
vehicle speeds to help dry the brakes quickly.
• It is forbidden to wash the air filter with water directly, which will
cause water to enter the engine and damage the engine.
• Never wash the underside of the seat cushion directly with water,
as this may result in a short circuit of the electrical components.
• Do not apply wax to tires, brakes, and matte finish.
• Wash the vehicle with cold water immediately after driving on a
road with high salt fog or near the sea. Do not use warm water to
wash, otherwise it will accelerate the chemical reaction of salt and
accelerate corrosion.
65
Publicidad
