Publicidad
Step 5
å
Turn six BLACK 9/16" FLAT HEAD SCREWS (32S) into the MODESTY
PANELS (G and O) until the shoulders of the SCREWS rest on the
surfaces of the MODESTY PANELS.
å
NOTE: Do not overtighten the SCREWS.
å
Slide the SHORT MODESTY PANEL MOLDINGS (S) onto the
MODESTY PANELS (G and O). Line up the grooves in the MOLDINGS
over the heads of the SCREWS in the MODESTY PANELS.
å
NOTE: If the MOLDINGS come up off of the SCREWS, remove them
and slide them on again. The MOLDINGS should be centered over the
MODESTY PANELS.
S
www.sauder.com/service
O
G
428728
Some assembly
(and snacks) required.
BLACK 9/16" FLAT HEAD SCREW
(6 used in this step)
Apply pressure with your hands as you
guide the MOLDINGS over the SCREWS
and onto the ENDS, UPRIGHTS, and BACKS.
S
Shoulder
Apply pressure with your hands as you
guide the MOLDINGS over the SCREWS
and onto the ENDS, UPRIGHTS, and BACKS.
32S
Shoulder
Page 11
Publicidad
