Publicidad
Step 36
å
Insert a SLIDE CAM (10A) into the SMALL DRAWER SIDES (D24 and D25).
å
Fasten two EXTENSION SLIDES (40NC) to the SMALL DRAWER SIDES (D24 and D25). Use two
BLACK 1-9/16" FLAT HEAD SCREWS (30S) through hole #1, through the SMALL DRAWER SIDES,
and into the SMALL DRAWER BACK (D109). Use two GOLD 5/16" FLAT HEAD SCREWS (3S)
through hole #3.
å
NOTE: The screw head in the CAM must be visible through the slotted hole in the SLIDE.
å
Fasten a KNOB SET (136K) to a DRAWER FRONT (V). Use a BLACK 1-1/8" MACHINE SCREW (21S).
å
Repeat this step for the other SMALL drawer.
2
3
136K
21S
BLACK 1-1/8" MACHINE SCREW
(2 used for the KNOB SETS)
Page 42
Open end
10A
1
D25
V
(2 screws per drawer)
GOLD 5/16" FLAT HEAD SCREW
(4 used in this step)
428728
Screw head - turn CAM to line up holes in
the SLIDES with holes in DRAWER SIDES
10A
D109
D24
40NC
2
3
3S
BLACK 1-9/16" FLAT HEAD SCREW
7
(4 used in this step)
Open end
1
(2 screws per drawer)
30S
(4 used in this step)
www.sauder.com/service
Publicidad
