Publicidad
Step 18
å
First, fill the holes in the LEGS (H, P, Q, and R) 1/4 to 1/2 full with
GLUE (177M). Then, insert the WOOD DOWELS (15F) into the holes.
Wipe away the excess GLUE (177M).
å
Now, fill the four holes in the TOP (X) 1/4 to 1/2 full with GLUE.
å
Fasten the LEFT END (B) and LEFT UPRIGHT (E) to the TOP (X).
Tighten four TWIST-LOCK® FASTENERS. Wipe away the excess glue.
å
NOTE: Be sure the WOOD DOWELS insert into the holes in the TOP.
STOP
If you purchased
the 428725
Hutch, assemble
that unit first.
This large hole must be here.
Page 24
E
H
X
428728
Fill the holes 1/4 to 1/2 full with GLUE.
Caution
!
Inspect the parts thoroughly before
Q
assembling. Disassembly of glued
parts is extremely difficult.
B
P
www.sauder.com/service
2
177M
R
15F
Publicidad
