Publicidad
Step 8
å
First, fill two holes in the LEFT END (B) 1/4 to 1/2 full with GLUE (177M). Then,
insert two WOOD DOWELS (15F) into the holes. Wipe away the excess GLUE.
å
NOTE: Be sure to position the parts exactly as shown and use the correct holes.
å
Now, fill the holes in the LEGS (P and R) 1/4 to 1/2 full with GLUE (177M).
å
Fasten the LEGS (P and R) to the LEFT END (B). Tighten six HIDDEN CAMS.
å
NOTE: Be sure the WOOD DOWELS in the LEFT END insert into the LEGS. Wipe
away the excess GLUE.
15F
15F
Page 14
S u r
f a c
e w
T W
I S T
- L O
F A S
T E N
These surfaces
should be even.
P
i t h
C K
®
E R S
B
R
428728
1
177M
Fill the holes 1/4 to 1/2 full with GLUE.
Caution
!
Inspect the parts thoroughly before
assembling. Disassembly of glued
parts is extremely difficult.
End with hole
Edge with
TWIST-LOCK®
FASTENERS
End with hole
www.sauder.com/service
Publicidad
