Publicidad
Step 31
å
Refer to the enlarged diagram to identify the parts on
the HINGES.
å
The DOOR may need some adjustments. Follow the text
below to make needed adjustments.
å
DOOR ADJUSTMENTS:
To adjust the DOORS from side to side (horizontal), turn the
adjusting screw in or out.
å
To adjust the DOOR up and down (vertical), loosen both
vertical adjustment screws. Move the DOOR up or down to the
desired location. Tighten the screws after making adjustments.
å
To adjust the DOOR in or out (depth), loosen the mounting
screw one turn and move the DOOR in or out, as needed.
Tighten the mounting screw after making adjustments.
www.sauder.com/service
Mounting screw (depth)
(vertical adjustment)
428728
17
Adjusting screw (horizontal)
Page 37
Publicidad
