Publicidad
Step 9
å
First, fill two holes in the LEFT UPRIGHT (E) 1/4 to 1/2 full with GLUE (177M). Then,
insert two WOOD DOWELS (15F) into the holes. Wipe away the excess GLUE.
å
NOTE: Be sure to position the parts exactly as shown and use the correct holes.
å
Now, fill the holes in the LEGS (H and Q) 1/4 to 1/2 full with GLUE (177M).
å
Fasten the LEGS (H and Q) to the LEFT UPRIGHT (E). Tighten six HIDDEN CAMS.
å
NOTE: Be sure the WOOD DOWELS in the LEFT UPRIGHT insert into the LEGS.
Wipe away the excess GLUE.
Edge with
TWIST-LOCK®
FASTENERS
These surfaces
should be even.
www.sauder.com/service
H
E
Q
428728
1
177M
Fill the holes 1/4 to 1/2 full with GLUE.
Caution
!
Inspect the parts thoroughly before
assembling. Disassembly of glued
parts is extremely difficult.
End without hole
15F
End without hole
Page 15
Publicidad
