Publicidad
Idiomas disponibles
Idiomas disponibles
enamel.
- All accessories in direct contact with food must be thoroughly cleaned
using suitable products before their first use.
- Cooking food in direct contact with grills and oven trays is not
allowed.
DISPLAY - Icons legend
INSTRUCTIONS FOR USE
Settings
Home: display start page.
1 = Allows you to proceed to the cavity setting screen
2 = Allows you to set the timer
3 = Allows direct access to the settings
Settings
4 = Choice of degree scale (° C or ° F).
5 = Setting the time.
6 = Exit - Term.
7 = Screen lock.
8 = To unlock, tap on the display for 10 seconds.
9 = It allows you to set the volume of the acoustic signal and optionally a
sound at the touch of the display.
Set a timer
Pause
Start
°C - °F
Screen lock
Confirmation
Settings
Meat probe
Home
Light
Timer
Exit - Term
Time
Settings Confirmation
Off
10 = AIncrease or decrease time..
11 = Confirm once the desired time has been set.
An acoustic signal will indicate the term.
12 = Confirm and return to the home page.
13 = Numeric keypad
Function
14 = Choose cooking function
14a = Choose dry / wet cooking
NOTE: only possible in certain cooking methods
14b = Confirm cooking function
14.1 = Light (turned on or off).
14.2 = Home (back to the home screen)
15 = ISet the cooking temperature.
15a = There are two opzini per set the temperature:
scrolling the bar
with + or -
15b = Confirm the cooking function.
16 = Set the cooking time and programmed start.
16a = Set the cooking time.
16b = Shows the cooking time.
16c = Set the start time.
16d = Confirm the cooking function.
16e = The oven display turns off to save energy after 1 hour of inactivity.
It can be reactivated with a simple tap.
COOKING PROCESS
In case of no cooking time set, it is possible to suspend
and then finish cooking.
12
SETTED CAVITY
Once the cavity has been set
(cooking function, temperature and
timer set) confirm to start preheating.
At this point the display will switch to
preheating mode
PRE-HEATING PHASE
There are four levels that allow
you to monitor the preheating
process. The red part will pro-
gressively increase until it fills the
display
PRERISCALDO ENDED
Quando la temperatura impostata
viene raggiunta, il display diventerà
rosso ad indicare il termine della fase
di preriscaldo, e l'inizio della fase di
cottura. Se era stato impostato un
tempo di cottura, il forno si spegnerà
automaticamente allo scadere del
tempo.
Publicidad
