Publicidad
Idiomas disponibles
Idiomas disponibles
How to use your appliance
Cleaning
CLEANING INSIDE - OUTSIDE
• Self-cleaning of the cavity by pyrolysis
Warning
Remove the accessories and wire tiers from the oven before starting a pyrolysis cleaning.
Before starting a pyrolysis cleaning of your oven, remove any large overflows that may have
occurred. Remove excess grease from the door with a damp sponge.
Par mesure de sécurité, l'opération de nettoyage par pyrolyse ne s'effectue qu'après blocage automatique
de la porte, il est impossible de déverrouiller la porte.
• Immediate self-cleaning
Le programmateur doit afficher l'heure du jour, sans clignoter. Sélectionnez un des cycles d'autonettoyage
avec la manette de fonctions ou
= Pyrolysis of 2 hours. Set the joystick to this function.
Set the joystick to this function.
ding to the degree of soiling of your oven.
The duration 2:00 is displayed. Confirm with the
At the end of the cleaning process the display shows 0:00 and the door unlocks.
Reset the function selector switch to 0.
• Delayed self-cleaning
You have the possibility to postpone the departure of your Pyrolysis. When the duration of the programme
is shown on the display, press the button
with
. Self-cleaning will start later and finish at the new programmed time. Reset the function selector
switch to 0 at the end of the cleaning process.
:
is displayed on the screen. Press + to choose your pyrolysis accor-
.
is displayed, the pyrolysis starts.
and set the new end time using the + and - keys, then confirm
17
Publicidad
