Descargar Imprimir esta página

Sportplus SP-HT-0001 Manual De Instrucciones página 25

Mini bicicleta estática

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

Always use the product on a horizontal, level, nonslip and solid surface. Never use
the product near water and make sure there is a safety clearance of at least one
meter on both sides and two meters behind the product.
Prevent your arms and legs from coming near the product's moving components.
Do not put any objects into any openings on the product.
CAUTION - PRODUCT DAMAGE
Do not alter the product in any way and use only original replacement parts. Have
all repairs carried out in a professional workshop or from similarly qualified persons
- improper repairs can lead to serious risks for the user. Use the product for the
intended purposes as described in the operating instructions only.
Shield the product from spraying water, moisture, high temperatures and direct
sunlight.
INFORMATION ON ASSEMBLY
Assembly of the product must be carried out carefully by an adult person. Ask for the
assistance of another, technically-skilled person in case of doubt.
Before beginning assembly of the product, read all assembly steps carefully and
review the diagram.
Remove all packaging materials and lay out all the parts. This will give you a good
overview and simplify assembly. Shield the assembly surface from filth and scratching
by laying down suitable padding.
Check the components against the components list to make sure all are present. Do
not dispose of all packaging materials until assembly is completed.
Please note that there is always a risk of injury when using tools to carry out manual
tasks. Therefore, please exercise caution when assembling this product.
Make sure your work environment is hazard-free. For example, do not leave any
tools lying around. Place the packaging materials somewhere where they will not
pose any hazards during assembly. Packaging foil or plastic bags pose a suffocation
hazard for children!
After assembling the product according to the instructions, make sure that all screws,
bolts and nuts are installed correctly and tightened.
If necessary, lay out protective padding (not included) beneath the product to protect
your floor as there is no guarantee that, for instance, the rubber feet will not leave
marks behind.
SP-HT-0001-IM-V06-INT.indb 25
25
4/13/2021 2:29:36 PM

Publicidad

loading

Este manual también es adecuado para:

Sp-ht-0100-ie