PNI P18UV Manual Del Usuario página 17

CTCSS/DCS scan
This func�on allows scanning frequencies that have ac�vated:
»tones = CTCSS, press MENU - [5] - [7], SEEK 67.0Hz - appears on
the screen
»codes = DCS, press MENU – [4] – [6], SEEK D023N - appears on
the screen
Press F+* to start scanning. Press the PTT/EXIT key to stop
scanning.
When the radio receives a signal, TX/CTCSS/DCS appears on the
screen. Press [MENU] to save. If SCAN CMP appears on the
screen, the radio intercepts a valid signal and the scanning stops.
If SCAN FAIL appears on the screen, the radio does not intercept
a valid signal, and scanning stops automa�cally.
Note: This func�on cannot be ac�vated if the radio is in channel
mode.
Key lock
This func�on locks the keys and prevent the accidentally touch.
To lock/unlock the keys, long press # . If the voice prompt
func�on is ac�vated, you will hear the confirma�on "Lock" or
"Unlock". The side keys can be used normally while the keyboard
is locked.
17