PNI P18UV Manual Del Usuario página 21

1. Press F+3 to switch to VFO frequency mode.
2. Press the keys: [MENU] [5][0] [MENU] [4] [MENU] [EXIT] to
delete all previously stored data on channel 10.
3. Press the keys: [MENU] [7] [MENU] 123.0 [MENU] [EXIT] to
enter the TX coding tone.
4. Enter the RX frequency (Ex. 43255000)
5. Press the keys: [MENU] [1][3] [MENU] 10 [MENU] to select the
channel (for example: 10)
6. Press the [EXIT] key. The RX frequency has been added.
7. Enter the TX frequency (Ex. 43755000)
8. Pres the keys: [MENU] [1][3] [MENU] [1][0] [MENU] to select
the same channel (for example: 10)
9. Press the [EXIT] key. TX frequency added.
10. Press F+3 to switch to MR channel mode. The saved channel
number and the set recep�on and transmission frequency will
appear on the screen.
Menu descrip�on
Note: Se�ng the following func�ons is not available in channel
mode: CTCSS tones/DCS codes, wide/narrow bandwidth, PTT-ID,
BCL, channel name edi�ng.
21