Serial
Communications:
Switching
Frequencies:
EMC:
3.3
RFI Filters
RFI filters are available as optional extra parts where required.
Used with
Filter Part
4200-6101
SE11200025 to
4200-6102
SE11200075
4200-6103
Used with
Filter Part
4200-6201
SE2D200075 to
4200-6204
SE2D200220
4200-6205
Table 3.25 Commander SE Size 2 - 200V, 26A, 1 phase
Used with
Filter Part
4200-6202
SE2D200075 to
4200-6304
SE2D200220
4200-6207
Table 3.26 Commander SE Size 2 - 200 / 400V, 16A, 3 phase
Used with
Filter Part
4200-6202
SE23400075 to
4200-6304
SE23400400
4200-6207
Table 3.27 Commander SE Size 2 - 200 / 400V, 16A, 3 phase
Commander SE User Guide
Issue Number 9
2-wire EIA485 via RJ45 connector
ANSI and Modbus RTU protocols supported
3, 6, and 12 kHz* are available with Intelligent Thermal
Management software automatically changing the switching
frequencies depending on load conditions, heatsink
temperature and output frequency, to prevent heatsink
overtemperature trips.
*12kHz not available on Commander SE size 5.
EN50082-2 and EN61800-3 for immunity
EN50081-1*, EN50081-2 and EN61800-3 first environment,
with optional RFI filter. See section 3.3 RFI Filters, and section
4.5 Electromagnetic compatibility (EMC) on page 33.
* Size 1 units only.
WARNING
Filter Type
No
Standard
Low leakage
Y
Table 3.24 Commander SE Size 1
Filter Type
No
Standard
Low leakage
Y
Filter Type
No
Standard
Low leakage
Y
Filter Type
No
Standard
Low leakage
Y
www.controltechniques.com
This is a product of the restricted distribution class
according to IEC61800-3.
In a domestic environment this product may cause
radio interference in which case the user may be
required to take adequate measures.
Low cost
Footprint
Y
Y
Low cost
Footprint
Y
Y
Low cost
Footprint
Y
Y
Low cost
Footprint
Y
Y
Mounting
Max motor
cable length
Side
(m)
Y
20
Y
Y
75
Y
Y
15
Mounting
Max motor
cable length
Side
(m)
Y
Y
100
Y
50
Y
Y
15
Mounting
Max motor
cable length
Side
(m)
Y
Y
100
Y
15
Y
Y
45
Mounting
Max motor
cable length
Side
(m)
Y
Y
100
Y
15
Y
Y
20
19