General Information - Control Techniques Commander SE11200025 Guia Del Usuario

English

General Information

The manufacturer accepts no liability for any consequences resulting from inappropriate, negligent
or incorrect installation or adjustment of the optional operating parameters of the equipment or from
mismatching the variable speed drive (Drive) with the motor,
The contents of this User Guide are believed to be correct at the time of printing, In the interests of
a commitment to a policy of continuous development and improvement, the manufacturer reserves
the right to change the specification of the product or its performance, or the contents of the User
Guide, without notice,
All rights reserved, No parts of this User Guide may be reproduced or transmitted in any form or by
any means, electrical or mechanical including photocopying, recording or by an information storage
or retrieval system, without permission in writing from the publisher,
Drive software version
This product is supplied with the latest version of user-interface and machine control software, If this
product is to be used in a new or existing system with other Commander SE Drives, there may be
some differences between their software and the software in this product, These differences may
cause this product to function differently, This may also apply to Drives returned from a Control
Techniques Service Centre,
If there is any doubt, contact a Control Techniques Drive Centre.
Environmental statement
Control Techniques is committed to minimising the environmental impacts of its manufacturing op-
erations and of its products throughout their life cycle. To this end, we operate an Environmental
Management System (EMS) which is certified to the International Standard ISO 14001. Further in-
formation on the EMS, our Environmental Policy and other relevant information is available on re-
quest, or can be found at www.greendrives.com.
The electronic variable-speed drives manufactured by Control Techniques have the potential to save
energy and (through increased machine/process efficiency) reduce raw material consumption and
scrap throughout their long working lifetime. In typical applications, these positive environmental ef-
fects far outweigh the negative impacts of product manufacture and end-of-life disposal.
Nevertheless, when the products eventually reach the end of their useful life, they can very easily be
dismantled into their major component parts for efficient recycling. Many parts snap together and can
be separated without the use of tools, while other parts are secured with conventional screws. Vir-
tually all parts of the product are suitable for recycling.
Product packaging is of good quality and can be re-used. Large products are packed in wooden
crates, while smaller products come in strong cardboard cartons which themselves have a high re-
cycled fibre content. If not re-used, these containers can be recycled. Polythene, used on the pro-
tective film and bags for wrapping product, can be recycled in the same way. Control Techniques'
packaging strategy favours easily-recyclable materials of low environmental impact, and regular re-
views identify opportunities for improvement.
When preparing to recycle or dispose of any product or packaging, please observe local legislation
and best practice.
Copyright © February 2004 Control Techniques Drives Limited
Issue Code: 9
Software: V02,00,01 onwards