Publicidad
Idiomas disponibles
Idiomas disponibles
EN
Safety
This code reader was developed, manufactured and tested in accordance with the
applicable safety standards. It corresponds to the state of the art.
Intended use
The code readers of the DCR 200i series are image-based code readers for all
commonly used bar codes, stacked codes and Data Matrix codes as well as for
codes of the GS1 DataBar family.
Areas of application
The code readers of the DCR 200i series are especially designed for the following
areas of application:
– Packaging systems
– Mounting/handling technology
– Analysis technology
CAUTION
Observe intended use!
The protection of personnel and the device cannot be guaranteed if the
device is operated in a manner not complying with its intended use.
Ä
Only operate the device in accordance with its intended use.
Ä
Leuze electronic GmbH + Co. KG is not liable for damages caused
by improper use.
Ä
Download the operating instructions for the device at
www.leuze.com.
Ä
Read this supplement and the operating instructions for the device
before commissioning the device. Knowledge of these documents
is required in order to use the equipment for its intended purpose.
NOTICE
The code readers of the DCR 200i series correspond to the following
classification with respect to the integrated lighting:
Ä
Illumination red:
risk group 0 (exempt group) in acc. with EN 62471
Ä
Infrared illumination:
risk group 1 acc. to EN 62471
NOTICE
Comply with conditions and regulations!
Ä
Observe the locally applicable legal regulations and the rules of
the employer's liability insurance association.
Foreseeable misuse
Any use other than that defined under "Intended use" or which goes beyond that
use is considered improper use.
In particular, use of the device is not permitted in the following cases:
12
Publicidad
