Leuze DCR 200i Serie Manual De Instrucciones página 17

NOTICE
The core colors only apply if Leuze's original connection cables are
used (see operating instructions, chapter "Cables accessories").
HOST/Ethernet, M12 socket, D-coded
Pin No. Designation
1 TD+
2 RD+
3 TD-
4 RD-
Thread FE (functional
(M12 earth)
socket)
IP address
Factory settings for the network address of the code readers DCR 202i,
DCR 248i:
– IP address: 192.168.060.101
– Subnet mask: 255.255.255.0
Code reader DCR 258i: automatic address assignment via DHCP server
– IP address: 0.0.0.0
Technical data
NOTICE
Additional technical data and notices on using the device can be found
in the operating instructions for the code reader.
Operating voltage
Average power consump-
tion
Assignment
Transmit Data +
Receive Data +
Transmit Data -
Receive Data -
Connection cable shield.
The shield of the connection cable is on the
thread of the M12 socket.
18 ... 30 V DC
PELV, Class 2 / SELV
8 W / 12 W with heating (without load on the switch-
ing output)
During strobed operation, a higher power can briefly
be consumed.
EN
17